CHD 8-440, Руководство по установке

Страница: 12 / 16

VP330-KBD
Roland VP-330 MIDI Interface
Model 8-440 ver. 1.0
Copyright © 2015 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
12
Pic. 2.5.10 Pic. 2.5.11
j) Put metal holder with FLH16 board back to the instrument and fix it with four original screws.
Don’t forget to insert two grounding lugs under the screws on right side (pic. 2.5.12)!
k) Plug three connectors of original bunched cables back to the FLH16 board and one connector
to the little board on the rear panel of the instrument (pic. 2.5.13). Be sure that the connectors are not
swapped (they should be marked as mentioned before in paragraph b).
Pic. 2.5.12 Pic. 2.5.13
2.6. MONTAGE OF THE INTERFACE BOARD
The interface board will be placed on right side on bottom plate of the instrument – under the
instrument’s keyboard (pic. 2.6.1).
a) Put the interface’s board to bottom plate of the instrument so that flat 50-pin plug is pointed to
the right. Insert four plastic supports from the interface accessory under the board (pic. 2.6.2).
Pic. 2.6.1 Pic. 2.6.2
b) Fix the interface board in the bottom plate of the instrument using four self tapping screws
from the interface accessory (pic. 2.6.3). Make small holes for the screws with small drill or a peak
before (pic. 2.6.4).