CHD 8-440, Руководство по установке

Страница: 10 / 16

VP330-KBD
Roland VP-330 MIDI Interface
Model 8-440 ver. 1.0
Copyright © 2015 CHD Elektroservis. All rights reserved.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
10
d) Unscrew ten screws from AGH19 board (pic. 2.5.5). Keep the screws. They will be used again
after the cable installation.
e) Unplug all sixteen connectors J1 to J16 from AGH19 / AGH17 board (pic. 2.5.6).
f) Remove the AGH19 / AGH17 board from the instrument (pic. 2.5.7) and put it solder side up.
Be careful during this and all next operations - note that electrostatic sensitive components are on
the board. Use conductive pad on the desktop and follow the rules for working with CMOS circuits!
Pic. 2.5.6 Pic. 2.5.7
Table 1 – Wires of flat cable of control signals connection
Wire Tone Connector / Pin Remark Wire Tone Connector / Pin Remark
1 Comm J3 / 4 Signed in red 26 F16 J9 / 4
2 C1 J4 / 1+2 To highest tone 27 F#2 J10 / 1
3 C2 J4 / 3 28 F#4 J10 / 2
4 C4 J4 / 4 29 F#8 J10 / 3
5 C8 J4 / 5 30 F#16 J10 / 4
6 C16 J4 / 6 To lowest tone 31 G2 J11 / 1
7 C#2 J5 / 1 32 G4 J11 / 2
8 C#4 J5 / 2 33 G8 J11 / 3
9 C#8 J5 / 3 34 G16 J11 / 4
10 C#16 J5 / 4 35 G#2 J12 / 1
11 D2 J6 / 1 36 G#4 J12 / 2
12 D4 J6 / 2 37 G#8 J12 / 3
13 D8 J6 / 3 38 G#16 J12 / 4
14 D16 J6 / 4 39 A2 J13 / 1
15 D#2 J7 / 1 40 A4 J13 / 2
16 D#4 J7 / 2 41 A8 J13 / 3
17 D#8 J7 / 3 42 A16 J13 / 4
18 D#16 J7 / 4 43 A#2 J14 / 1
19 E2 J8 / 1 44 A#4 J14 / 2
20 E4 J8 / 2 45 A#8 J14 / 3
21 E8 J8 / 3 46 A#16 J14 / 4
22 E16 J8 / 4 47 H2 J15 / 1
23 F2 J9 / 1 48 H4 J15 / 2
24 F4 J9 / 2 49 H8 J15 / 3
25 F8 J9 / 3 50 H16 J15 / 4