5
5
1.1.1
The display symbols
Symbols Description
AC
Measurement of the AC signal
DC
Measurement of the DC signal
AUTO
Auto-ranging
HOLD
Memorisation and display of memorised values
MAX
Maximum RMS value
MIN
Minimum RMS value
.run r.un ru.n
Capacitance meter, acquisition in progress
-----
Frequency measurement impossible
O.L
Measurement capacities exceeded
V
Volt
Hz
Hertz
F
Farad
° C ° F
Degrees Celsius - Degrees Fahrenheit
A
Ampere
%
Percentage
Ω
Ohm
n
Symbol of the nano- prefix
µ
Symbol of the micro- prefix
m
Symbol of the milli- prefix
k
Symbol of the kilo- prefix
M
Symbol of the mega- prefix
Audible continuity measurement symbol
Symbol for measurement and testing of semiconductor junctions
Permanent mode
Low-battery indicator
1.1.2 Measurement capacities exceeded (O.L)
O.L
(
Over Load
) is displayed when the measured signal exceeds the capacity of the instrument's scale. If the manual
RANGE mode is active, press the
key to change the scale and then carry out the measurement.
There are two exceptions:
•
1000 V voltage range
"OL" from 1050 V
•
10 A range
"OL" from 20 A
1.1.3 Automatic change of measurement range
The
AUTO
symbol on the display indicates that the instrument automatically changes the measurement range to make the
measurement. You can manually change the range by pressing
.
