Chauvet nexus 4x1, Руководство пользователя

Страница: 24 / 35

Operation
-22- Nexus™ 4x1 User Manual Rev. 3
The Connected
Devices Window
Part 2: Test
Network
Connectivity
It can take up to 20 seconds for all the products to populate the list and the devices display in
different colors for different reasons, which are as follows:
Colors and Activity Explanation
Black with an ID number and IP address
There is connectivity and everything is working properly,
but the device is not yet mapped.
Green with an ID number and IP address
There is connectivity and everything is working properly,
and the device is mapped.
Black to red with no IP address during initial
population
The King-Net™ Mapper could not find an IP address for
the device, most likely because the system is using an
Ethernet switch instead of an Ethernet hub.
Black to red after initial population The connectivity has been lost.
4. Select the Output dropdown icon from the tool bar at the top of the Kling-Net Mapper
screen. One of the options will be Test Pattern.
5. Select Test Pattern. The image to the right of the icon is a small screen, indicating that
Test Pattern is the current mode.
6. Select the icon to the right of the Output dropdown icon. One of the options will be
Flashing Output Selection.
7. Select Flashing Output Selection. The icon is a faded green square with an arrow,
indicating that a flashing green light is the current test pattern.
8. Left click once on an LED display product. The product flashes green.
9. Repeat step 8 for every product in the list.