Operation
-20-
Nexus™ 4x1 User Manual Rev. 3
Art-Net™
To set the Nexus™ 4x1 to Art-Net, do the following:
1. Press
<MENU>
and then
<DOWN>
. Ethernet Settings shows in the display.
2. Press
<ENTER>
.
3. If
<Art-Net>
shows in the display, go to Step 7 below to configure Art-Net™ settings.
If
<Kling-Net>
shows in the display, do the following:
4. Press
<ENTER>
. The words
<Kling-Net>
start blinking
5. Press
<UP>
or
<DOWN>
The words
<Art-Net>
show and blink.
6. Press
<ENTER>
. The words
<Art-Net>
stop blinking.
The Art-Net™ protocol is set. Go to Step 7 below to configure Art-Net™ settings.
Once the Nexus™ 4x1 is set to Art-Net, do the following:
7. Press
<DOWN>
. Universe
< xx>
shows..
8. Press
<ENTER>
the
< xx>
starts blinking.
9. Press
<UP>
or
<DOWN>
until the desired universe number (1–15) shows.
10. Press
<ENTER>
the
< xx>
stops blinking.
11. Press
<DOWN>
Subnet
< xx>
shows.
12. Press
<ENTER>
the
< xx>
starts blinking.
13. Press
<UP>
or
<DOWN>
until the desired subnet number (1–15) shows.
14. Press
<ENTER>
the
< xx>
stops blinking.
15. Press
<DOWN>
. Net
< xx>
shows..
16. Press
<ENTER>
the
< xx>
starts blinking.
17. Press
<UP>
or
<DOWN>
until the desired net number (1–127) shows.
18. Press
<ENTER>
the
< xx>
stops blinking.
19. Press
<DOWN>
. IP Mode
< xxxxx>
shows.
20. Press
<ENTER>
the
< xxxxx>
starts blinking.
21. Press
<UP>
or
<DOWN>
to cycle through the IP options
<Manual>
,
<Static>
,
<DCHP>
.
22. Press
<ENTER>
.
If
<Manual>
IP mode is selected, the IP Address shows. To set the IP address, do the
following:
1. Press
<ENTER>
to move between IP address elements.
2. Press
<UP>
and
<DOWN>
to set the numbers within each IP address element.
3. Press
<MENU>
to confirm the IP address.
Содержание nexus 4x1
Страница 1: ...User Manual ...
Страница 9: ...Introduction Nexus 4x1 User Manual Rev 3 7 Dimensions Pixel Layout 1 2 3 4 ...
