Chauvet nexus 4x1, Руководство пользователя

Страница: 20 / 35

Operation
-18- Nexus™ 4x1 User Manual Rev. 3
Info
DMX Address
DMX Channel
Master/Slave
Info shows information about the Nexus™ 4x1. To show information, do the following:
1. Select the desired program level based on the information required.
2. Press
<MENU> to return to the home screen.
•
Fixture Hours – The amount of time the product has been in use
•
Version – The software version installed on the product
•
IP Address - The product’s IP address
•
Device ID - The product’s ID number (used for Kling-Net only)
DMX Address sets the Nexus™ 4x1 DMX starting address for DMX mode and Art-Net™
mode. To select a DMX address, do the following:
1. Go to DMX Address main level.
2. Select the starting address ( 001–512 ).
3. Press <MENU> to return to the home screen.
The highest recommended DMX addresses for each DMX personality are listed in the table
below.
DMX Pers DMX Address DMX Pers DMX Address
3Ch 510 12Ch 501
5Ch 508 17Ch 496
9Ch 504
DMX channel sets the DMX personality for use in all modes and protocols: DMX, Kling-Net,
and Art-Net™. Each DMX personality has different capabilities. For more information, see
DMX Mode . To select a DMX personality, do the following:
1. Go to the DMX Channel main level.
2. Select the desired personality (3Ch, 5Ch, 9Ch, 12Ch, or 17Ch).
3. Press <MENU> to return to the home screen.
Master/Slave mode configures the Nexus™ 4x1 panels so that a group of them (the slaves)
duplicates the actions of a single panel (the master). Master/Save mode does not need a DMX
controller. To configure the Nexus™ 4x1 panels for Master/Slave mode, do the following:
Set each of the slave panels:
1. Go to the Master/Slave main level.
2. Select Slave .
3. Press <MENU> to return to the home screen.
Set the master panel:
1. Go to the Master/Slave main level.
2. Select Master .
3. Select a manual program. For more information, see Auto Show and Static Color .
4. Press <MENU> to return to the home screen.
5. Set the master to a manual mode. For more information, see Auto Show .
•
Set the slaves before setting the master.
•
Do not connect a DMX controller to Nexus™ 4x1 prodycts that are configured for
Master/Slave operation.
•
The master panel must be set to a manual mode for Master/Slave to work.