Page 18 of 22
Freedom Stick User Manual Rev. 3
Master/Slave
Mode
Master/Slave mode allows a single Freedom Stick product (the “master”) to control the
actions of one or more Freedom Stick products (the “slaves”) without the need of a DMX
controller or DMX cables. The master (transmitter) product will be set to operate in either
Stand-Alone mode or with the IRC-6, while the slave (receiver) products will be set to
operate in Slave mode. Once set and connected, the slave products will operate in
unison or in sequence with the master product.
Configure the products as indicated below.
Slave products:
1. Press
<MENU>
repeatedly until
S-tr
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select
ON
.
4. Press
<ENTER>
.
5. Use
<UP>
or
<DOWN>
to select
drCH
.
6. Press
<ENTER>
.
7. Select the receiving D-Fi channel,
dr 1
–
16
.
8. Press
<ENTER>
.
9. Press
<MENU>
repeatedly until
SLA
shows on the display.
10. Press
<ENTER>
to accept.
11. Use
<UP>
or
<DOWN>
to select
SLA1
(first slave),
SLA2
(second slave),
SLA3
(third slave), or
SLA4
(fourth slave).
12. Press
<ENTER>
.
13. Finish setting and connecting all the slave products.
Master product:
14. Press
<MENU>
repeatedly until
S-tr
shows on the display.
15. Press
<ENTER>
.
16. Use
<UP>
or
<DOWN>
to select
ON
.
17. Press
<ENTER>
.
18. Use
<UP>
or
<DOWN>
to select
dtCH
.
19. Press
<ENTER>
.
20. Use
<UP>
or
<DOWN>
to select the transmitting channel that the slave products
are receiving.
21. Press
<ENTER>
.
22. Set the master product to operate either:
•
With the IRC-6.
•
In Sound-Active mode
or
•
In Auto mode.
P 29–35
are designed specifically for Master/Slave mode, but all
programs will work.
•
Configure all the slave products before configuring the master to transmit.
•
Never connect a DMX controller to a D-Fi channel configured for Master/Slave
operation because the controller may interfere with the signals from the
master.
Содержание Freedom Stick
Страница 1: ...01 User Manual ...
