Freedom Stick User Manual Rev. 3
Page 15 of 22
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic
Programs
To run the Freedom Stick in automatic mode, follow the instructions below:
1. Press
<MENU>
repeatedly until
P--
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
and
<DOWN>
to select an auto program (
P 1–35
).
4. Press
<ENTER>
.
For
P 22–27
:
5. Use
<UP>
or
<DOWN>
to select the first color (
1--r
,
1-rg
,
1--g
,
1-gb
,
1--b
,
1-rb
,
1rgb
, or
1OFF
).
6. Press
<ENTER>
.
7. Use
<UP>
or
<DOWN>
to select the second color (
2--r
,
2-rg
,
2--g
,
2-gb
,
2--b
,
2-rb
,
2rgb
, or
2OFF
).
8. Press
<ENTER>
.
For each program 22–27, color 1 and color 2 cannot be assigned the same color.
Auto-Program
Speed
To change the auto-program speed on the Freedom Stick, do the following:
1. Press
<MENU>
repeatedly until
S--
shows on the display.
2. Use
<UP>
and
<DOWN>
to increase or decrease the program speed (
S 1–100)
.
3. Press
<ENTER>
. The product will return to the last selected mode.
Sound-Active
Mode
To run the Freedom Stick in sound-active mode, do the following:
1. Press
<MENU>
repeatedly until
Snd
shows on the display.
2. Press
<ENTER>
twice to accept.
The product will only respond to low frequencies of music (bass and drums).
Sound Sensitivity
To change the sound sensitivity on the Freedom Stick, follow the instructions below:
1. Press
<MENU>
repeatedly until
SenS
shows on the display.
2. Use
<UP>
and
<DOWN>
to increase or decrease the sound sensitivity (
u 0–100)
.
3. Press
<ENTER>
. The product will return to the last selected mode.
Preset Color
Mode
To run the Freedom Stick in preset color mode, follow the instructions below:
1. Press
<MENU>
repeatedly until
C--
shows on the display.
2. Press
<ENTER>
.
3. Use
<UP>
and
<DOWN>
to select a static color (
C1–7
).
4. Press
<ENTER>
twice to accept.
Custom Color
Mixing
To custom mix a static color, follow the instructions below:
1. Press
<MENU>
repeatedly until
U--
shows on the display.
2. Press
<ENTER>
and one of the following will show on the display:
•
r_ _ _
(red)
•
g_ _ _
(green)
•
b_ _ _
( blue)
3. Press
<ENTER>
to cycle through the color settings.
4. When the desired color shows on the display, use
<UP>
or
<DOWN>
to increase or
decrease the color value.
5. Repeat steps 3 and 4 until the product outputs as desired.
Содержание Freedom Stick
Страница 1: ...01 User Manual ...
