Chauvet Freedom Stick, Руководство пользователя

Страница: 9 / 22

Freedom Stick User Manual Rev. 3 Page 9 of 22
Wireless DMX
Linking
The Freedom Stick works with a DMX controller in Wireless DMX mode. In Wireless DMX
mode a lighting control board or D-Fi product must send wireless DMX signals to the
products. Information about DMX is in the DMX Primer, which is available from the
Chauvet website
www.chauvetlighting.com/download .
DMX Personality
and Starting
Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Freedom Stick uses up to 50 DMX channels in a 50-CH DMX mode, which defines
the highest configurable address to
463 .
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com .
To select the starting address, do the following:
1. Press
<MENU> repeatedly until 3-CH , 8-CH , 48CH , or 50CH shows on the display.
2. Press <ENTER> and d 1–512 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER> .
Wireless DMX
Configuration
The Freedom Stick offers wireless control of 2 or more products with a single DMX
controller. To set up the D-Fi 2.4 GHz transceiver, do the following.
For the transmitting product:
1. Press
<MENU> repeatedly until S-tr shows on the display.
2. Press <ENTER> .
3. Press <UP> or <DOWN> until dtCH appears on the display.
4. Press <ENTER> .
5. Use <UP> or <DOWN> to select the transmitting signal ( dt 1 – dt16 ).
For the receiving product(s):
1. Press
<MENU> repeatedly until S-tr shows on the display.
2. Press <ENTER> .
3. Press <UP> or <DOWN> until drCH appears on the display.
4. Press <ENTER> .
5. Use <UP> or <DOWN> to select the receiving signal ( dr 1 – dr16 ). The channel
number should match the transmitting signal you chose when setting up the
transmitting product.
Caution: D-Fi 2.4 GHz operation can be interrupted or inhibited by obstructions
between the transmitter and receiver such as structures or people. For best
results, keep the line of sight clear.
•
The Freedom Stick is fully compatible with the D-Fi 2.4 GHz wireless
transceiver (transmitter/receiver) from Chauvet (sold separately). For more
detailed information about D-Fi 2.4 GHz functionality, refer to the D-Fi 2.4 GHz
User Manual available at the Chauvet website
www.chauvetlighting.com .
•
Ensure that all linked products are configured to the same DMX personality.