COLORdash™ Quad User Manual
13
3/30/2009 4:01 PM
Fixture Stacking
The fixture may be stacked together horizontally to create a strip light or vertically for a blinder effect.
This can be used for runway lighting or cycloramas. With the different methods of bracket mounting, this
turns this fixture into a very versatile lighting tool.
Note: In this configuration, it is only recommended that a maximum of 3 fixtures be stacked together at a
time.
Note: You will still need to connect and configure each fixture separately. For the power, you may use
the linking cables provided with the fixture.
Please follow the below instructions for stacking the fixtures horizontally.
1. Remove the brackets that come with the fixtures, in order to make room for the attachment
screws.
2. In the same location where the bracket attaches, you may install the linking screws. This
will attach the fixtures close together.
3. You may use the brackets for this configuration, or simply install the clamp directly to the
fixture as showed on the previous page.
Horizontal Stacking
Vertical Stacking
Note: When using the vertical
stacking method, you must
use theater style c-clamps
(CLP-04)