Appendix
CH-244 User Manual
6
2005-11-15/13:03
O
PERATING
I
NSTRUCTIONS
The Scrambler
™
is a high output sound activated effect light.
It produces 4 moonflowers that rotate
back and forth to the music and are divided into two zones. Sensitivity to sound can be adjusted for
both zones via the two knobs at the rear of the fixture.
Whether used in a mobile or permanent environment, you may find it useful to control this effect by
means of a relay system for remote switching or to go with DMX control, use the latest in DMX
compatible (Relay Pack), all available from CHAUVET.
A relay system will allow you to remotely trigger the Scrambler
™
and any other non-dimmable effect
light from a switch panel. Make sure to use a cable of at least 25 feet to provide ample distance
between the control panel and the switch pack for most mobile lighting applications.
If you would prefer to control it directly from your DMX lighting console then we suggest a DMX
compatible (relay switch-pack). These devices are an extremely affordable solution to operating non-
DMX lighting effects remotely.
Duty Cycle (recommended)
For optimum fixture longevity, it is recommended that this fixture cycle On and Off every 15 minutes
due to the high temperature created while in use. For every 15 minute period that the fixture is used,
allow 15 minutes in the Off position to cool down.
To learn more about these and other CHAUVET products visit us at www.chauvetlighting.com.
