Page 19 of 24
WELL STX 180 User Manual Rev. 1
Operation
Dimmer Profiles
This setting provides four different options to simulate the dimming curve of an incandescent lighting
product. To set how fast the output of the WELL STX 180 changes when the output value is modified, do
the following:
1. Go to the
Dimmer Mode
main level.
2. Select a dimmer curve (
Off
,
Dimmer 1
,
Dimmer 2
, or
Dimmer 3
).
System Information
To display the total number of hours the product has run, the total LED hours, the installed software
version, and the product’s UID, follow the instructions below:
1. Go to the
Information
main level.
2. Select
Fixture Hours
,
LED Hours
,
Version
,
or
UID
.
Factory Reset
To restore the WELL STX 180 to factory default settings, do the following:
1. Go to the
Factory Reset
main level.
2. Select
No
(do not reset) or
Yes
(reset to factory default settings).
Master/Slave Mode
The Master/Slave mode allows a group of WELL STX 180 products (the slaves) to simultaneously duplicate
the output of another WELL STX 180 (the master) without a DMX controller. To set each of the slaves:
1. Go to
Wireless Setting > W-DMX On/Off
.
2. Select
On
.
3. Go to
Wireless Setting > Operating Mode
.
4. Select
Receive
.
5. Go to
Wireless Setting > Receive Reset
.
6. Select
Yes
.
To set the master:
1. Go to
Wireless Setting > W-DMX On/Off
.
2. Select
On
.
3. Go to
Wireless Setting > Operating Mode
.
4. Select
Transmit
.
5. Go to
Wireless Setting > Link
.
6. Select
Link
to link to the slave products.
7. Select a standalone setting, or control with the IR remote.
Off
: The output is proportional (linear) to the dimmer channel value.
Dimmer 1–3
: The output follows the dimmer value based on the corresponding dimmer curve,
DIM1 being the fastest.
•
The master is the one that runs a program whether in Auto, Static, or IR mode.
•
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•
Do not connect a WDMX transmitter to the products configured for Master/Slave
operation. The WDMX transmitter may interfere with signals from the master.
Содержание Well STX 180
Страница 1: ...USER MANUAL...
