Page 18 of 24
Operation
WELL STX 180 User Manual Rev. 1
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Static Mode
Manual Color Mixer
To do color mixing without a DMX controller, follow the instructions below:
1. Go to the
Static
main level.
2. Select
Manual Color
.
3. Select which
RGBW
color to adjust.
4. Set color value from
000–255
.
Color Temperature
To select a preset color temperature, do the following:
1. Go to the
Static
main level.
2. Select
Color Temperature
.
3. Select the desired color temperature, from
2800K
to
8000K
.
Fixed Color
To select a single or combination RGBW color, follow the instructions below:
1. Go to the
Static
main level.
2. Select
Fixed Color
.
3. Select a single RGBW color or an RGBW color combination.
Auto Programs
To select which auto program to display, do the following:
1. Go to the
Auto Show
main level.
2. Select the desired auto program, from
Auto 1–28
.
3. Select between
Foreground
(sets what foreground color to display) and
Background
(sets what
background color to display).
4. Select among
RGBW
color or color combinations,
2800K
,
7000K
,
Auto
(automatic colors), or
Off
(no foreground or background color).
Auto Program Speed
To adjust the speed of the auto programs, follow the instructions below:
1. Go to the
Auto Show
main level.
2. Select the desired auto program, from
Auto 1–28
.
3. Select
Speed
.
4. Select the speed of auto programs, from
1
(slowest) to
100
(fastest).
White Balance
To set the maximum values of a given LED color to create a white light output, do the following:
1. Go to the
White Balance
main level.
2. Select
Off
(to use factory default white setting) or
Manual
(to customize the white balance).
a. Select the desired color (
RGBW
).
b. Set the desired value for the selected color (
125–255
).
c. Repeat steps a–b until the static color is set as desired.
Run Time
To lessen the product output to maximize the product run time, follow the instructions below:
1. Go to the
Run Time
main level.
2. Select the desired product run time (
3
,
5
,
8
, and
12
hours
).
Back Light
To select the amount of time the back light on the WELL STX 180’s display stays on after the last button is
pressed on the control panel. do the following:
1. Go to the
RBack Light
main level.
2. Select
Always On
(remains On),
10S
(10 seconds),
30S
(30 seconds), or
2min
(2 minutes).
The auto programs cannot be edited.
Содержание Well STX 180
Страница 1: ...USER MANUAL...
