Chattanooga Intelect Advanced Therapy System Скачать руководство пользователя страница 113

Страница: 113 / 120

Intelect® Advanced Therapy System

108

TROUBLESHOOTING

ERROR CODES (continued)

Code

Number

Type

Message

Probable Cause

Possible Remedies

108

Warning

Attempting to save additional User Protocols or Sequences after
system memory has reached the maximum allowed (200).

Delete some User Protocols or Sequences. Refer to appropriate section of the Therapy System User
Manual for instructions.

109
110
111

Warning
Warning
Warning

Attempting to access protocols or sequences and none are found
in the system.

User Protocols- No protocols have been saved in the system. Refer to Therapy System User

Manual to save User Protocols.

Sequences- No User Sequences have been saved in the system. Refer to Therapy System User

Manual to save Sequences.

112

Warning

Ultrasound Applicator disconnected from system during treatment
session.

Connect Ultrasound Applicator to system.

If Ultrasound Applicator is connected, reset system by turning power switch Off and On.

If problem persists, connect a known good Ultrasound Applicator. If problem continues,

contact dealer or Chattanooga Group for service.

113

Warning

Attempting to perform Ultrasound treatment with no Applicator
connected to the system.

Connect the desired Ultrasound Applicator to the system.

If Ultrasound Applicator is connected, reset system by turning power switch Off and On.

If problem persists, connect a known good Ultrasound Applicator. If problem continues,

contact dealer or Chattanooga Group for service.

114

Warning

Ultrasound Applicator is not calibrated.

Attempt to use a known good Applicator. If problem continues, contact dealer or Chattanooga
Group for service.

115

Warning

Ultrasound Applicator is too hot.

Allow Ultrasound Applicator Sound Head to cool to ambient temperature.

116
117

Warning
Warning

No Patient Data Card is inserted into the system.

Attempted to use an Invalid Patient Data Card.

Properly insert the Patient Data Card into the system port. Refer to Therapy System User

Manual for new and existing Patient Data Card instructions.

Attempt to use a known good Patient Data Card.

Make certain a Patient Data Card and not an sEMG Data Card is being used.

If problem continues, contact dealer or Chattanooga Group for service.

Supplied by EME Services Ltd

Содержание Intelect Advanced Therapy System

























































































































Результаты поиска

Содержание Intelect Advanced Therapy System

Отзывы:

Похожие инструкции для Intelect Advanced Therapy System

Бренды по названию

Популярные бренды

Chattanooga Intelect Advanced Therapy System, Руководство пользователя

Результаты поиска

Содержание Intelect Advanced Therapy System

Отзывы:

Похожие инструкции для Intelect Advanced Therapy System

Бренды по названию

Популярные бренды