Chattanooga Group ERGOSTYLE FX 5820, Руководство по обслуживанию

Страница: 19 / 31

17
Ergostyle ™ FX Tables
A. Part Numbers
Appropriate Drop . . .Refer to Section 7- Parts
B. Equipment Required
#2 Phillips Screwdriver
3/16" Allen Wrench
1/2" End Wrench
C. Drop Assembly Removal
1. Remove appropriate cushion for the drop
that is to be replaced. See Figure 5.15.
NOTE:
If replacing a Drop on an Auto Drop Table, perform
step 2 first. If replacing a Drop on a Manual Drop Table
go to step 3.
2. Remove the four screws from top of the
Pneumatic Cylinder. See Figure 5.16.
3. Remove the hardware securing the Drop
Assembly to the frame. See Figure 5.17.
D. Drop Assembly Replacement
Replace Drop Assembly" reverse order of
removal.
•
•
•
5 REMOVAL & REPLACEMENT
5.6 DROP ASSEMBLY REMOVAL AND REPLACEMENT
Unplug the unit from the power source before
attempting removal or replacement procedures to
prevent electrical shock.
FIGURE 5.15
FIGURE 5.16
FIGURE 5.17
REMOVE APPROPRIATE
CUSHION
PNEUMATIC CYLINDER
HARDWARE
DROP HARDWARE