Chattanooga Group ERGOSTYLE FX 5820, Руководство по обслуживанию

Страница: 14 / 31

12
Ergostyle ™ FX Tables
5.2 DAUGHTER BOARD REMOVAL AND REPLACEMENT MANUAL TABLE ONLY
Unplug the unit from the power source before
attempting removal or replacement procedures to
prevent electrical shock.
A. Part Numbers
Daughter Board . . . . . . . . . . . . . . . . . . . . . . .58543
B. Equipment Required
#2 Phillips Screwdriver
Ground Strap
C. Daughter Board Removal
1. Put Ground Strap on to prevent damage to
the Daughter Board through static.
2. Remove the four Power Supply Cover
Mounting Screws with the #2 Phillips
Screwdriver. See Figure 5.5.
3. Remove connector and two mounting
screws from Daughter Board. See Figure 5.6.
4. Carefully lift the Daughter Board from the
Driver Board. See Figure 5.7.
D. Replacing Daughter Board
Replace Daughter Board in reverse order of
removal.
•
•
FIGURE 5.5
5 REMOVAL & REPLACEMENT
FIGURE 5.6
FIGURE 5.7
POWER SUPPLY COVER
CONNECTOR
MOUNTING SCREWS