Chattanooga Group 8080 Скачать руководство пользователя | Manualshive

Страница: 51 / 54

background image

48

Mōveo™ XP

United States of America

Chattanooga Group (“Company”) warrants that the Mōveo™ XP (“Product”) is free of defects in material and
workmanship. This warranty shall remain in effect for one year (12 months) from the date of original consumer
purchase. If this Product fails to function during the one year warranty period due to a defect in material or
workmanship, Company or the selling dealer will repair or replace this Product without charge within a period of
thirty days from the date on which the Product is returned to the Company or the dealer.

All repairs to the Product must be performed by a service center authorized by the Company. Any modifications
or repairs performed by unauthorized centers or groups will void this warranty.

This Warranty Does Not Cover:

• Replacement parts or labor furnished by anyone other than the Company, the selling dealer, or a service
technician certified by the Company.

• Defects or damage caused by labor furnished by someone other than Company, the selling dealer, or a certified
Company service technician.

• Any malfunction or failure in the Product caused by product misuse, including, but not limited to, the failure to
provide reasonable and required maintenance or any use that is inconsistent with the Product User’s Manual.

COMPANY SHALL NOT BE LIABLE IN ANY EVENT FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some locations do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.

To obtain service from Company or the selling dealer under this warranty:

1. A written claim must be made within the warranty period to the Company or the selling dealer. Written claims
made to the Company should be sent to:

Chattanooga

Group

4717 Adams Road

Hixson,

TN

37343

USA

Phone: (423) 870-2281

Service Phone: +1-800-494-3395

FAX: (423) 875-5497

and

2. The Product must be returned to the Company or the selling dealer by the owner.

This warranty gives you specific, legal rights and you may also have other rights which vary from location to
location.

The Company does not authorize any person or representative to create for it any other obligation or liability in
connection with the sale of the Product.

Any representation or agreement not contained in the warranty shall be void and of no effect.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING ANY WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

9 - WARRANTY

«
...
49
50
51
52
53
...
»

Содержание 8080























































Отзывы:

Нет отзывов

Похожие инструкции для 8080

Бренд: Salvis Страницы: 40

Бренд: IDEAL Страницы: 2

ImageQuant LAS 4000

Бренд: GE Страницы: 86

Бренд: GE Страницы: 160

Бренд: GE Страницы: 134

Бренд: Labnet Страницы: 2

Бренд: Abicor Binzel Страницы: 92

Бренд: Gary Machinery Страницы: 14

Бренд: Garelick Страницы: 4

Бренд: OceanSat Страницы: 85

Бренд: IEMCA Страницы: 82

KID 80-IV Touch

Бренд: IEMCA Страницы: 122

Бренд: Calrec Страницы: 92

Бренд: JBSYSTEMS Light Страницы: 17

Бренд: Raytec Страницы: 60

Бренд: SandenVendo Страницы: 19

Бренд: Yamaha Страницы: 16

Бренд: SCHUNK Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды