Chassis Plans JXT6966, Техническое описание оборудования

Страница: 7 / 66

JXT6966 / JXTS6966 Technical Reference
CHASSIS PLANS iii
H
ANDLING
P
RECAUTIONS
WARNING: This product has components which may be damaged by electrostatic discharge.
To protect your system host board (SHB) from electrostatic damage, be sure to observe the following
precautions when handling or storing the board:

Keep the SHB in its static-shielded bag until you are ready to perform your installation.

Handle the SHB by its edges.

Do not touch the I/O connector pins.

Do not apply pressure or attach labels to the SHB.

Use a grounded wrist strap at your workstation or ground yourself frequently by touching the
metal chassis of the system before handling any components. The system must be plugged into an
outlet that is connected to an earth ground.

Use antistatic padding on all work surfaces.

Avoid static-inducing carpeted areas.
R
ECOMMENDED
B
OARD
H
ANDLING
P
RECAUTIONS
This SHB has components on both sides of the PCB. Some of these components are extremely small and
subject to damage if the board is not handled properly. It is important for you to observe the following
precautions when handling or storing the board to prevent components from being damaged or broken off:

Handle the board only by its edges.

Store the board in padded shipping material or in an anti-static board rack.

Do not place an unprotected board on a flat surface.