Chassis Plans ATXP-875P, Техническое описание

Страница: 9 / 87

ATXP-875P Technical Reference Introduction
Chassis Plans V
Static Electricity Warning!
The ATXP-875P has been designed as rugged as possible but can still be damaged if jarred sharply or struck.
Handle the motherboard with care.
The ATXP-875P also contains delicate electronic circuits that can be damaged or weakened by static electricity.
Before removing the ATXP-875P from its protective packaging, it is strongly recommended that you use a
grounding wrist strap. The grounding strap will safely discharge any static electricity build up in your body and will
avoid damaging the motherboard. Do not walk across a carpet or linoleum floor with the bare board in hand.
ATXP-875P - An Overview
The ATXP-875P represents the ultimate in industrial embedded motherboard technology. No other system board
available today provides such impressive list of features:
CPU Support
•
Supports full series of Intel Pentium 4 (mPGA478 400MHz, 533MHz and 800MHz PSB) processors
featuring Intel Hyper-Threading technology.
Supported Bus Clocks
•
400MHz, 533MHz and 800MHz.
Memory
•
Four DIMM sockets up to 4GB DDR SDRAM, PC2100 (DDR 266MHz), PC2700 (DDR 333MHz) and
PC3200 (DDR 400MHz) featuring dual channel and dynamic mode. Please, refer to chapter 3 for memory
details.
On-Board I/O
•
2 Floppies up to 2.88 MB.
•
Dual independent Serial ATA ports with transfer rates up to 150 MB/s per port.
•
Dual channel PCI 32-bit EIDE controller – UDMA 66/100 supported. One extra connector (mini-Header 44
pin) in parallel to IDE2 for Solid State IDE disk or any 44 pin IDE device support.
•
Four high speed RS-232 serial ports 16 Bytes FIFO (16550). COM_B optional RS-232 IrDA, COM_C and
COM_D optional RS-422/485.
•
One Centronics™ compatible bi-directional parallel port. EPP/ECP mode compatible.
•
One PS/2 mouse and one PS/2 keyboard connectors.
•
Auxiliary Keyboard/Mouse header for front panel access.
•
Four Universal Serial Bus connectors, USB 1.1 and USB 2.0 compliant.
•
Four 32-bit PCI slots, two PCI-X 64-bit slot and one AGP PRO 8x slot.
•
Two RJ45 Ethernet connectors (second 10/100/1000 optional, first optional 10/100/1000).
•
Power Button – advanced management support.
•
Eight GPIOs in a Header.
•
Automatic CPU voltage & temperature monitoring device.
•
On-board Buzzer.
•
Audio AC97 compliant. Microphone In, Stereo Line In and Out, Auxiliary CD/Audio In.
•
On-board POST Display Diagnostics.
ROM BIOS
•
American Megatrends AMIBIOS with FLASH ROM.