Chassis Plans ATXP-875P, Техническое описание

Страница: 30 / 87

Chapter 2: BIOS Configuration ATXP-875P – Technical Reference
20 Chassis Plans
ARMD Emulation Type
ATAPI Removable Media Device (ARMD) is a device that uses removable media, such as the LS120, MO
(Magneto-Optical), or Iomega Zip drives. If you want to boot up from media on an ARMD, it is required that you
emulate boot up from a floppy or hard disk drive. This is especially necessary when trying to boot to DOS. You can
select the type of emulation used if you are booting from such a device. The Optimal and Fail-Safe default setting is
Auto .
Auto Set this value to allow the BIOS to automatically set the emulation used by ARMD. This is the default
setting.
Floppy Set this value for ARMD to emulate a floppy drive during boot up.
Hard disk Set this value for ARMD to emulate a hard disk drive during boot up.
FLOPPY CONFIGURATION SCREEN
Floppy Configuration Settings
You can use this screen to specify options for the Floppy Configuration Settings. Use the up and down <Arrow>
keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option.
Floppy Drive A: and B:
Move the cursor to these fields via up and down <arrow> keys. Select the floppy type. The Optimal setting for
floppy drive A: is
1.44 MB 3½”. The Fail-Safe setting for floppy drive A: is 1.44 MB 3½”. The Optimal setting for
floppy drive B: is Disabled. The Fail- Safe setting for floppy drive B: is Disabled .
Disabled Set this value to prevent the use of the selected floppy disk drive channel. This option should be set if
no floppy disk drive is installed on the specified channel. This is the default setting for
Floppy Drive B .
360 KB 5 ¼ ” Set this value if the floppy disk drive attached to the corresponding channel is a 360 KB 5¼ “ floppy
disk drive.
1.2 MB 5 ¼ ” Set this value if the floppy disk drive attached to the corresponding channel is a 1.2 MB 5¼ “ floppy
disk drive.
720 KB 3 ½ ” Set this value if the floppy disk drive attached to the corresponding channel is a 720 KB 3½ “ floppy
disk drive.
1.44 MB 3 ½ ” Set this value if the floppy disk drive attached to the corresponding channel is a 1.44 MB 3½ “ floppy
disk drive. This is the default setting for Floppy Drive A .
SUPER IO CONFIGURATION SCREEN
SuperIO Configuration Screen
You can use this screen to select options for the Super I/O settings. Use the up and down <Arrow> keys to select an
item. Use the <Plus> and <Minus> keys to change the value of the selected option.
OnBoard Floppy Controller
Set this option to Enabled to enable the floppy drive controller on the motherboard. The settings are Enabled and
Disabled. The default setting is Enabled.