Chassis Plans ATXP-875P, Техническое описание

Страница: 42 / 87

Chapter 2: BIOS Configuration ATXP-875P – Technical Reference
32 Chassis Plans
HARD DISK DRIVES
Hard disk drives
Use this screen to view the hard disk drives in the system. To access this screen, select Hard disk drives on the Boot
Setup screen and press <Enter>.
REMOVABLE DEVICES
Removable Devices
Use this screen to view the removable drives attached to the system. To access this screen, select Removable
Devices on the Boot Setup screen and press <Enter>.
ATAPI CDROM DRIVES
ATAPI CD-ROM Drives
Use this screen to view the ATAPI CD-ROM drives in the system. To access this screen, select ATAPI CDROM
Drives on the Boot Setup screen and press <Enter>.
Security Setup
ezPORT Password Support
Two Levels of Password Protection
ezPORT provides both a Supervisor and a User password. If you use both passwords, the Supervisor password must
be set first. The system can be configured so that all users must enter a password every time the system boots or
when ezPORT Setup is executed, using either or either the Supervisor password or User password. The Supervisor
and User passwords activate two different levels of password security. If you select password support, you are
prompted for a one to six character password. Type the password on the keyboard. The password does not appear on
the screen when typed. Make sure you write it down. If you forget it, you must drain NVRAM and reconfigure.
Remember the Password
Keep a record of the new password when the password is changed. If you forget the password, you must erase the
system configuration information in NVRAM. See (Deleting a Password) for information about erasing system
configuration information.
Select Security Setup from the ezPORT Setup main BIOS setup menu. All Security Setup options, such as password
protection and virus protection, are described in this section. To access the sub menu for the following items, select
the item and press <Enter>:
•
Change Supervisor Password
•
Change User Password
•
Clear User Password
Supervisor Password
Indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not,
Not Installed displays.
User Password
Indicates whether a user password has been set. If the password has been installed, Installed displays. If not, Not
Installed displays.