Charnwood W618, Руководство по эксплуатации

Страница: 6 / 20

ASSEMBLY INSTRUCTIONS
- Using M8 X 12mm coach bolts and M8 nuts bolt together two ‘A’ frames using two legs,
one long strut in the middle and a short strut at the top (Fig.1 and Fig.2).
- Join the two ‘A’ frames together using the remaining long
bars in the middle and two short bars at the top (Fig.3).
- Fit the four rubber feet to the bottom of the legs
(Fig.4).
- Place the saw table on the stand, lining up the
slots in the base of the saw table with the holes on
the top of the stand. Bolt in place using 4 off M8
Hexegan head bolts and 4 off M8 nut (Fig.5)
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5