EXTRA RULES FOR SPINDLE MOULDERS
1. A spindle moulder should never be used by an untrained operator. Proper training
is essential for the operator’s safety.
2. The machine must be properly maintained and the correct fitting of all guards
checked.
3. Guards should be of such a design and fitted in such a way that they keep fingers
out of an area of 50 mm (2 inches) beyond the sweep of any cutter that might be
used.
4. Always ensure that you use safe working procedures and that you understand what
you are doing.
5. Wear appropriate clothing. Long loose sleeves, long hair or anything else that
could get caught in the machine should be tied back or otherwise secured.
6. Never use this spindle moulder for curved work, without a Ring Fence fitted.
7.
NEVER
use a cutter block without limiters.
8. Feed the workpiece to the cutter block or router bit against the direction of rotation.
9. Never draw the workpiece back during cutting. Wait until the block stops rotating
before pulling the workpiece back.
Risk of injury!
Wear Eye
Wear Ear
Never reach into
Protection
Protection
moving tooling.
Specification
Main table surface
600 x 400mm
Sliding table size
400 x 180mm
Sliding carriage stroke
400mm
Table height
870mm
Weight Net/Gross
95kg/120kg
Spindle diameter
30mm
Maximum Tooling Diameter
150mm
Rotation speeds
4(1400/4000/6000/9000) rpm
Spindle length available for tooling
105mm
Spindle rise and fall
110mm
Table aperture (with inserts)
160mm ( 110/75mm )
Table aperture depth
50mm
Motor (induction)
240V, 1500W 2hp single phase
Extractor outlet
100mm
Rating
Light trade
Warranty
1 year
