4. Remove adjusting keys and spanners. Form a habit of checking to see that
the keys and adjusting spanners are removed from the machine before
switched it on.
5. Keep your work area clean. Cluttered areas and workbenches increase the
chance of an accident.'
6. Do not use in dangerous environments. Do not use power tools in damp or
wet locations, or expose them to rain. Keep work areas well illuminated.
7. Keep children away. All visitors should be kept a safe distance from
the work area.
8. Make workshop childproof. Use padlocks, master switches and remove
starter keys.
9. Do not force the machine. It will do the job better and be safer, at the
rate for which it is designed.
10. Use the right tools. Do not force the machine or attachments to do a job for
which they are not designed. Contact the manufacturer or distributor if there is
any question about the machine's suitability for a particular job.
11. Wear proper apparel. Avoid loose clothing, gloves, ties, rings, bracelets, and
jewellery which could get caught in moving parts. Non-slip footwear is
recommended. Wear protective hair covering to contain long hair.
12. Always use safety glasses. Normal spectacles only have impact resistant lenses.
They are not safety glasses.
13. Do not over-reach. Keep proper footing and balance at all times.
14. Maintain machine in good condition. Keep machine clean for best and safest
performance. Follow instructions for lubrication and changing accessories.
15. Disconnect the machine from its power source before servicing and when
changing accessories.
16. To avoid accidental starting, make sure the switch is in the OFF position before
plugging in the mains cable.
17. Never leave the machine running unattended. Turn the power off. Do not leave
the machine until it comes to a complete stop.
18. Do not use any power tools while under the effects of drugs, alcohol or medication.
19. Always wear a face or dust mask if operation creates a lot of dust and/or chips.
Always operate the tool in a well ventilated area and provide for proper dust
removal. Use a suitable dust extractor.
