Forward
These instructions are important, the information contained herein is essential for the
correct build and operation of the machine and the safety of its operator.
The machine is equipped with various safety devices to protect itself and the operator.
However, these devices cannot cover all eventualities and a thorough understanding of
spindle moulding techniques, good workshop practice plus the controls and operation of
this machine are essential for your safety.
Do not operate the machine until you have read and understood all the instructions in this
manual and are familiar with both the machine and spindle moulding techniques.
Use of the Machine
Purpose
This machine is designed for moulding along and across the grain of prepared timber,
using cutters and limiters, correctly mounted in a standard Euro type cutter block.
It is designed for use by one operator.
Operator Qualifications/Training
Operators of this machine should have a suitable qualification in the use of woodworking
machinery, including spindle moulders or should have been trained by someone holding
such qualifications.
GENERAL SAFETY RULES
WARNING:
Do not attempt to operate the machine until you have read thoroughly and
understood completely all instructions, rules, etc. contained in this manual. Failure to
comply may result in accidents involving fire, electric shock, or serious personal injury.
Keep this owner's manual and review it frequently for continuous safe operation.
1. Know your machine. For your own safety, read the owner's manual carefully.
Learn its application and limitations, as well as specific potential hazards
pertinent to this machine.
2. Make sure all tools are properly earthed.
3. Keep guards in place and in working order. If a guard must be removed for
maintenance or cleaning, make sure it is properly replaced before using the
machine again.
