When stacking the spacers, ensure that the
one with the roll pin is at the top of the stack.
The pin engages with the slot in the top of
the spindle.
Not all of the spacers will be used at the
same time.
Before fitting the cutter block onto the
spindle, engage the spindle lock.
Now fit, (in reverse order):
Locking bolt
Top cap
Locking spacer with the roll pin
Spacers
Cutter block
Spacers
The locking bolt must be firmly tightened.
Once the stack on the spindle is tight,
release the spindle rotation lock, before
starting the machine.
The Spindle Controls
Spindle Height Locking Lever
Rise and fall hand wheel.
One complete turn raises or lowers the
arbor by 2 mm (0.08”).
Spindle Rotation Lock
The power supply cable will be found inside
the base cabinet.
The cable gland should be fitted to the cut
out in the door lower flange and the locking
nuts tightened
