Assemble the Rip Fence
Place the Rip Fence Carrier on the front rail of
the saw.
The carrier can be positioned to the left or right
side of the blade as required.
Lock the carrier by pressing down on the handle
which will clamp it to the front rail.
Slide the heads of the two M6 x 35mm coach
bolts into the T-shaped channel of the rip fence
extrusion.
Position the thumb screws and washers into the
recess in the rip fence carrier and tighten them.
The rip fence can be used in the High or Low
position.
The standard assembly is the High position.
The low position is used for cutting narrow
strips, close to the blade and avoids the fence,
fouling on the saw guard.
