Blade Height Adjustment
The Height Adjustment Handle is used to raise
and lower the blade.
Turn clockwise to lower the blade and
ant-clockwise to raise it.
Blade Height Adjustment Hand Wheel
Before making a cut, set the blade height so
that only the teeth of the blade sit above the
piece to be cut.
Bevel Adjustment Lock
To tilt the blade, first loosen the bevel lock then
swing the assembly along the slot until the
required angle is indicated against the scale.
Lock the lever firmly before use.
Blade Tilt Locking Handle
Warning:
Never attempt to tilt the blade while it
is running.
The Rip Fence
– The Rip Fence is used for
making longitudinal cuts usually with the grain
of the timber.
Set the fence to the required the dimension
using the scale reader.
The fence can be fitted to either the left or right
of the saw blade.
Clamp in position by pressing down firmly on
the locking handle.
Fence Locking Handle
