Charnwood C-Four Insert, Руководство по эксплуатации и установке

Страница: 16 / 22

9. ATTACH TOP CAP
Slide the cast top cap (a) into position. Finally, with the door
open, insert hex head screw (b) from the underside of the top
shelf. Tighten to secure the assembly into position.
a. Cast top cap
b. Hex head screw
Side pieces
16
®
INSTALLATION INSTRUCTIONS
8. SECURE THE FLUE ADAPTORS
Working from the inside of the stove, push the flue collar up through
the flue outlet to meet the upper flue collar, so that the coach bolts
come down through the holes. Secure bolts with nuts.
All flue connections must be well sealed. Check that the flue pipe is
not obstructed or restricted in any way and that all joints are well
sealed.
Secure with nut here
Sealed with 8mm
self-adhesive fibreglass webbing seal
Upper flue collar
Convection casing
Flue pipe
Wall of stove
Inner flue collar
SIDE PIECES
Remove air control knob, undo both allen key bolts in lower panel
and remove it. Fit machine screws through the holes in the lower left
and right hand side to secure the lower end of the side pieces. The
tops of the side pieces are secured with a machine screw. Refit the
lower panel and air slider knob.