15
the feeder information. Changing feeder parameters make global changes to all
components associated to that feeder.
Here, when function descriptions are the same as in components tab, it is left blank.
Figure 10.6
.
Window after “Run” / “Edit” / Feeder tab, listing feeders.
(1)
Feeder:
Displays feeder information from work file. Note, all feeder information is
not displayed in this list, but can be accessed from Edit;
(2)
Add:
Add a new row to the end of the list;
(3)
Insert:
Insert a new row before the present selected row;
(4)
Delete:
Delete selected row. Note that all components using this feeder in the
component list will also be deleted;
(5)
Edit:
Edit selected material stack, as shown as below;
(6)
Modify ID:
Changes feeder number.
When changing parameters in this feeder list, all components having the same feeder
number will change.
(1)
Feeder:
Set current feeder number. This value cannot repeat. The numbers
