32
2. Use a 7 mm nut driver to remove the LP orifice located in the center of side burner tube.
3. Replace with a NG orifice to the valve then tighten it with a 6mm nut driver. And replace the side burner
ring.
Rear Burner Conversion
Tools required:
Phillips Head Screwdriver (+)
6 mm wrench
Monkey wrench
1. Remove the rear burner heat shield by unfastening the screws in the back of firebox. Then unfasten
six screws on the rear burner cover and remove cover from grill.
Figure 246
CSA INTERNATIONAL
Project 2078110
33 of 46
