15
12.
Charcoal handle Installation
Remove the charcoal handle (K) from the carton, then screw
it into the hole on the charcoal door by turning the handle
clockwise as shown in Fig. 15.
13.
Push Bar Installation
Take out the push bar (O) from carton, align it to the
right top side panel of the charcoal grill using four 1/4-
in. x 12-mm truss head screws (CC) and four 1/4-in. lock
washers (GG) as shown in Fig.16.
Note:
Two screws and two washers for each side of
the push bar.
Push the screw cover to cover these two screws on
both sides.
Use four 1/4-in. x 12-mm screws (CC) and four 1/4-in.
lock washers (GG) to secure the bottom four screw
holes as shown in Fig.17.
Note:
Two screws and two washers for each bottom
side of the push bar.
O
Fig 16
K
4 X
4 X
Fig 17
Fig. 15
Figure 246
CSA INTERNATIONAL
Project 2078110
16 of 46
