Charlton & Jenrick Valor LEX2, Инструкция по эксплуатации

Страница: 6 / 28

3
before unplugging it from the outlet.
1.23 ALWAYS disconnect this unit from the power supply
before performing any assembly or cleaning, or before
relocating the electric fireplace.
1.24 NEVER leave this heater unattended. ALWAYS unplug
this heater when not in use.
1.25 ALWAYS store this heater in a dry location. NEVER use
the fireplace if it has become wet.
1.26 ONLY use this heater on a 120V AC 15-Amp circuit.
NEVER overload the circuit. If this heater trips the circuit
breaker, unplug all other appliances on the same circuit
before the next use. Avoid plugging other appliances into
the same circuit as this heater.
1.27 NEVER plug this heater into an outlet that is old, cracked,
or has any loose wires or connections. Plugging this heater
into a faulty outlet could result in electric arcing within the
outlet that could cause the outlet to overheat or catch fire.
1.28 MAKE SURE the plug fits tight in the outlet! Faulty wall
outlet connections or loose plugs can cause the outlet to
overheat.
1.29 Heaters draw more current than small appliances.
Overheating may occur even if it has not occurred with the
use of other appliances.
1.30 During use check frequently to see if the plug outlet or
faceplate is HOT! If the outlet or faceplate is HOT,
discontinue use immediately and have a qualified
electrician inspect and/or replace the faulty outlets.
1.31 This heater has a polarized plug (one blade is wider than the
other). As a safety feature to reduce the risk of electrical shock,
the plug is intended to fit in a polarized outlet only one way. If
the plug doesn't fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
SAVE THESE INSTRUCTIONS!