Charlton & Jenrick Valor LEX2, Инструкция по эксплуатации

Страница: 18 / 28

15
NOTE: It is normal for the fan heater to stop
running for periods of time. This happens
because the room temperature is at or above
the temperature set on the remote control. The
heater indicator will be turned off after 10s if
you have the flame ON. The heater indicator will
stay ON if you use the heating function only.
Count Down Timer
NOTE: This setting is only for operating in normal
mode. It allows the appliance to go into standby
after a set period.
6b.15 Press to cycle through the settings from
0.5 hours to 9 hours, and then OFF. The timer logo and
time will show on the screen.
The heater must be in ON position.
The heater can be automatically run by using daily
timer and weekly timer on the remote.
Set up Day, Time and Comfort temperature.
6b.16
Press to turn on the remote handset. Hold
the button for 3 seconds to enter the setting
screen.
6b.17
Press the ' ' and ' ' button to choose Day,
Time or your comfortable temperature. your
selection will be highlighted.
6b.18 Pressing the ' ' and ' ' button will adjust
the number.
⚫ Time: 24-hour system
⚫
Select y our com fort able temperature f r o m 1 5 - 2
5
⚫
Temperature unit:
Daily Timer Heating
6b.19 The following are preset heating periods, which can
be altered if you want.
06:00 until 08:30
17:00 until 22:00