Charlton & Jenrick Valor LEX2, Инструкция по эксплуатации

Страница: 10 / 28

7
The interface of the mood light cable is on the top of the appliance, near the
position of the power cord. Please also check the function after connecting the
mood light.
N o t e : compatible mood light devices are available from Valor Electric Fire
and their dealers. Other brands may not be suitable and void the
warranty.
Connecting the Power Supply
The power connection can be made with the 2m Mains Cable provided or
alternatively it can be hard wired by unscrewing and removing the Access Plate,
the Mains Cable and retention grommet. The access plate can be repositioned
so that the 22mm hole sits over the cutout in top of appliance.
The 22mm hole can be used to fix a conduit connector so that the appliance can
be hard wired.
Mood light
connection cable
Supply access
plate
Mains cable
Remove the access plate and the
power cable. It will look like this when ready for
hard wiring.
Neutral
Ground
Live
Insert the hard wires from the big hole
of access plate and use the screw
driver to connect the hard wire. Every
hole corresponds to a wire (neutral, live
and ground). Make sure it is wired
correctly.
Fix the access plate back tightly and
save the power cord for future use.
Preparing the casing
The appliance can be installed in 3 different arrangements. They are as follows: