Charlton & Jenrick INFINITY 480 BF, Руководство пользователя

Страница: 31 / 41

www.charltonandjenrick.co.uk
31
LT 6935 Iss 4

Load 6 off of the 1.5 v “C” batteries into the holder
provided and a ttach to battery lead. Locate the
loaded

Holder within the bracket at the bottom of the
fireplace assembly.

Fit the Inlet cover at the bottom of the appliance
between the glass panel and fireplace frame
assembly.

Finally place the RH and LH fireplace frame side covers
within the fireplace frame assembly.

When assembly is complete please refer to section
three operation
SECTION THIRTEEN: Instruct and Advise the Customer (Installation Instructions)

Demonstrate the lighting and extinguishing procedure to the consumer/user and the removal and refitting of
the trim for cleaning.

Explain that for the first few hours of the fire operating there will be an initial odour. This is due to the curing of
the paint, the appliance should be operated on its high setting, and it is recommended that a window is left
open until that odour has completely disappeared.

Instruct on the glass removal and refitting.

Instruct on the shapes cleaning and advise that a vacuum cleaner can be used but only after all the loose
shapes have been removed. Refer to ‘Health & Safety Notice (See Section One) at the front of this booklet
before proceeding.

Advise customer that with use the inside of the air box will change colour, particularly the sides and rear.
This is quite normal and often adds to the overall effects of the appliance.

Advise that the appliance should be serviced annually by a competent person i.e. a Gas safe registered
engineer in accordance with these instructions.

Although the appliance is fitted with a glass front which acts as a dress guard it is strongly recommended