Chariot Carriers CHEETAH 1, Руководство пользователя

Страница: 41 / 55

1
Assembly
Push the wheel arms, with the bend toward the centre of the
carrier and wheel dropouts pointing downwards, into each
Versawing 2.0.
Press the small button in for each and push the wheel arms into
the Versawing 2.0 until the large button engages
(Figures 1 to 3).
the wheel arm should nowprotrude about 2 cm / 3/4 inch out of
the rear side of the Versawing 2.0.
warning
make sure that the wheel arms are correctly attached to the
carrier. incorrect attachment may lead to loss of the front
wheel resulting in an otherwise avoidable accident in which
you and/or your passenger(s) could suffer serious injury or
death.
Guide the quick-release axle through the wheel axle and screw
on the nut. Both skewer springs must be located on each side
so that the narrow side points towards the centre of the hub.
!