Chariot Carriers CHEETAH 1, Руководство пользователя

Страница: 33 / 55

Attaching the hitcharm to the
CTS Ready Chassis
the hitcharm is attached to the cts ready chassis into the left
“Versawing 2.0” bracket.
The hitcharm must always be attached into the left-hand
side of the carrier (as seen in the direction of travel). The
hitcharm must always be attached with both spring buttons
pointing upwards.
Press down the small button and slide the hitcharm into the
Versawing 2.0 until the large button engages in the Versawing
2.0 (Figures 1 to 3).
the hitcharm should now protrude about 2 cm / 3/4 inch out of
the rear side of the Versawing 2.0, and the rear vertical holes in
the Versawing 2.0 and hitcharm must align with each other.
insert the security pin into the rear vertical hole of the
Versawing 2.0 and push it down completely through the
hitcharm until the retaining ring is touching the top of the
Versawing 2.0.
warning
the security pin must always be inserted, in addition to
the large spring button in the bicycle hitcharm! a hitcharm
that has not been secured properly may come loose du-
ring travel resulting in an accident in which you and/or your
passenger(s) could suffer serious injury or death.
!