Chariot Carriers CHEETAH 1, Руководство пользователя

Страница: 39 / 55

Use as a pull wagon
on short stretches and level surfaces, the carrier may be used
as a pull wagon.
For this, insert the hitcharm rotated at 90° counterclockwise in
the left-hand (in direction of travel) Versawing 2.0 (the same
wing as the hitcharm is used for trailering). the front end of the
hitcharm must point upwards.
Push the hitcharm in until the spring buttons, which is now on
the outside side, come up against the Versawing 2.0.
then press the smaller button in and slide the hitcharm into the
Versawing 2.0 until the large spring button audibly engages.
on this type of assembly, engagement of the spring button is
not visible, however you should be able to see the small spring
button returned to its normal “out” position.
insert the security pin through the horizontal hole at the back of
the Versawing 2.0.
warning
make sure the spring button engages correctly. Before use,
ensure that the hitcharm is securely locked by giving it a
good forward pull. if this is not the case, the hitcharm might
work loose during travel resulting in an accident in which
your passenger(s) could suffer serious injury or death.
warning
Only park the carrier on flat surfaces and secure it with the
parking brake, otherwise the carrier could role away in which
your passenger(s) could suffer serious injury or death.
warning
any assembly of the hitcharm other than the one described
is not permitted. any kind of incorrect assembly may lead
to loss of the carrier during travel resulting in an accident
in which you and/or your passenger(s) could suffer serious
injury or death.
!
!
!