background image

1

warning

On the CX, the front tinted flap must be rolled up or folded 

inwards to insert the sunscreen in the mesh pocket behind 
the seat. if this is not done, the sunscreen will be too long 
and it may get damaged.

Sunscreen

a sunscreen is located under the upper rear of the two-in-one 
weather cover.

if it is not being used, it can be rolled up and secured with the 
loops located at the top corners. the two-in-one weather cover 
is then placed over it and fastened.

Sunscreen on the CX (all covers can be rolled up and 
secured with the loops except the CX has an extended 

length flap)

On the CX the front extended length tinted flap can be rolled up 

and secured with two loops.

At low temperatures the sunscreen can be unrolled, flipped 

back, and inserted in the mesh pocket behind the seat (see 
section 4.7). this reduces penetration of cold air through the 
mesh parts of the seat backrest.

Front side air vent on the Cougar

For additional ventilation of the interior, the cougar is equipped 
with a side air vent to the front of each side window. it can be 
opened either fully or partly from the inside by means of a fabric 

flap.

Side window on the CX

For additional ventilation of the interior, the cx is equipped with 
removable side windows. these are each attached by 2 zippers 
and may be removed and stored in the rear storage bag.

there is a tab on the assembly to make it easier to reattach 
the lower zipper. the end of the zipper can be pulled outwards 
using this tab.

TiP

For additional climate control, the cx’s side windows can be 
partially opened, similar to the vents on the cougars. to do 
this both zippers can be partially undone from the front, and 
then the forward portion of the side window can be folded 
back and tucked under the rear portion. make sure that the 
front portion cannot slip out as you are travelling.

!

Содержание CHEETAH 1
























































Отзывы: