Chariot Carriers CHEETAH 1, Руководство пользователя

Страница: 16 / 55

1
. Climate control
The two-in-one weather cover
all models are equipped with the chariot two-in-one weather
cover, which consists of a plastic window that can be rolled up
with mesh beneath it.
the two-in-one weather cover is secured at the bottom by a
double velcro fastener. First the velcro tag of the two-in-one
weather cover is pressed onto the velcro surface on the carrier.
then the velcro on the carrier is pressed from the outside
against the velcro tab of the two-in-one weather cover.
nOTE
always make sure that the velcro fastener is properly fas-
tened.
Opening the two-in-one weather cover:
First undo the outer tabs of the assembly at both velcro
fasteners. then lift the two-in-one weather cover upwards,
pulling equally on
both of its tabs.
TiP
on the cougar and cx, make sure the upper corners rubber
seal of the two-in-one weather cover is properly seated. if
this is not the case, the seal will not effectively prevent water
penetration.
2009 and later model cougars and cx’s are equipped with a
new two-in-one weather cover attachment method. the two-in-
one cover is attached to the external 3/8in / 9.5mm aluminum
frame via hooks on the underside of the two-in-one cover. using
the thumb-pulls located on the lower outer corners, pull down-
wards and outwards, extending the two-in-one cover in such a
manner as to allow the hooks to catch onto the external frame.
to remove, pull down and then out on the thumb-pulls to release
the two-in-one cover.