DVR USER MANUAL - Issue 3 - 12/2013
| 15
CHANNEL SAFETY SYSTEMS
t: 0845 884 7000 | w: www.channelsafety.co.uk
CHAPTER 4: DVR BOOT UP
4.1 System Initialization
4.2 Live Interface
After connecting the DVR to the Power outlet and pressing the
Power button on the front panel, you will enter into the
system initializing screen shown in Picture 4-1
After finishing initialization the system will enter into <Live>
screen. Picture 4-2 shows the 16-split display defaulted by
system, which shows no video input status. Once there are
video inputs, the screen will display live images from the
cameras. In Live mode, if you use the mouse to double-click
the live image of any channel, the image will be maximized
to full screen, by double-clicking again, image will come back
to the 16-split display mode; clicking the right button of the
mouse will enter into a Pop-up Menu; clicking the left button
of the mouse allows you select menu items; and clicking any
area outside the menu allows you exit the Pop-up menu.
Please Note:
When internal HDD is not connected or an error occurs, the character “H” will appear on the first channel of the
live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into [Main menu > Alarm] to set
HDD loss, HDD space not enough and alarm output to “off”
Picture 4-1
Picture 4-2
