19
200947 - WALk BEhiND BLOWER
OPERATiON
Blower Operation
WARNiNG
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible serious
injuries.
Before Each Use inspect the Blower
1. Always make sure the spark plug wire has been disconnected
and engine has been grounded.
2. Always visually inspect the blower fan cover for loose fittings,
cracks, or other damage.
3. DO NOT operate the blower if there is any indication of
damage to parts or the unit.
4. DO NOT operate the blower if the discharge chute is clogged.
Remove all debris before operation.
5. Always inspect the engine and make sure the oil level and
fuel level are correct before operating.
6. Always inspect the work area for any distractions or factors
that may prevent operator safety or proper operation.
Adjust the handle height
The handle height can be adjusted to a comfortable position for
the user and, also be folded down for storage.
1. Pull the handle adjust lever outward to loosen the teeth
engagement on the adjusters.
2. Move the handle to the desired height for user comfort.
3. Ensure that the adjuster teeth are aligned to seat into each
other then, push the handle adjust lever inward to lock back
into place
