19
100472 - 3 iN. (7.6 cM) chiPPER ShREDDER
OPERATiON
before Each Use inspect the chipper-
Shredder
1. Always make sure the spark plug wire has been disconnected
and engine has been grounded.
2. Always visually inspect all attachments and chutes for loose
fittings, cracks, fraying or other damage.
3. DO NOT operate the chipper-shredder if there is any
indication of damage to parts or the unit.
4. DO NOT operate the chipper-shredder if there are any clogged
chutes. Remove all debris before operation.
5. Always inspect the engine and make sure the oil level and
fuel level are correct before operating.
6. Always clean and inspect the spark arrestor regularly (follow
spark arrestor maintenance schedule).
7. Always inspect the collection bag for any fraying, holes or
damage. Never use a damaged collection bag.
8. Always inspect the work area for any distractions or factors
that may prevent operator safety or proper operation.
DANGER
DO NOT operate a damaged chipper-shredder, or one with
damaged or loose parts. Operating a damaged unit or one with
loose parts may cause damage to the product or injury to the
user. Make sure all parts are in good condition and secure
before operation.
Starting the Engine
1. Make certain the chipper-shredder is on a flat, level surface.
2. Push the engine switch to the “ON” position.
3. Move the choke lever to the “CHOKE” position.
4. Move the fuel valve to the “ON” position.
5. Pull the starter cord slowly until resistance is felt and then
pull rapidly.
6. As engine warms up, move the choke lever to “RUN.”
