background image

CHAMPION POWER EQUIPMENT, INC. (CPE) 

AND THE UNITED STATES ENVIRONMENT PROTECTION AGENCY (U.S. EPA) 

EMISSION CONTROL SYSTEM WARRANTY

Your Champion Power Equipment (CPE) engine complies with U.S. EPA emission regulations. 

YOUR WARRANTY RIGHTS AND OBLIGATIONS:

The US EPA AND CPE are pleased to explain the Federal Emission Control Systems Warranty on your 2020 small off-road engine (SORE) 
and engine powered equipment. New engines and equipment must be designed, built and equipped, at the time of sale, to meet U.S. 
EPA regulations for small off-road engines (SORE). CPE warrants the emission control system on your small off-road engine (SORE) 
and equipment for the period of time listed below, provided there has been no abuse, neglect, unapproved modification, or improper 
maintenance of your equipment.

Your emission control system may include parts such as the carburetor, fuel-injection system, the ignition system, catalytic converter and 
fuel lines. Also included may be hoses, belts, connectors and other emission related assemblies. Where a warrantable condition exits, CPE 
will repair your small off-road engine (SORE) at no cost to you including diagnosis, parts and labor.

MANUFACTURER’S EMISSION CONTROL SYSTEM WARRANTY COVERAGE:

This emission control system is warranted for two years, subject to provisions set forth below. If, during the warranty period, an emission 
related part on your engine is defective in materials or workmanship, the part will be repaired or replaced by CPE.

OWNER WARRANTY RESPONSIBILITIES:

As the small off-road engine (SORE) owner, you are responsible for the performance of the required maintenance listed in your Owner’s 
Manual. CPE recommends that you retain all your receipts covering maintenance on your small off-road engine (SORE), but CPE cannot 
deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the small off-road engine (SORE) owner, you should however be aware that CPE may deny you warranty coverage if your small, off-road 
engine (SORE) or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications. 

You are responsible for presenting your small off-road engine (SORE) to an Authorized CPE service outlet or alternate service outlet as 
described in (3)(f.) below, CPE dealer or CPE, Santa Fe Springs, Ca. as soon as a problem exists. The warranty repairs should be completed 
in a reasonable amount of time, not to exceed 30 days. 

If you have any questions regarding your warranty rights and responsibilities, you should contact:

Champion Power Equipment, Inc. 

Customer Service 
12039 Smith Ave. 

Santa Fe Springs, CA 90670 

1-877-338-0999 

[email protected]

Содержание 100472







































Отзывы: