Challenger VKFCSD22IR Series, Руководство пользователя

Страница: 16 / 24

7. 2 Scan
1.
● 【
SCAN NUMBER
】
● 【
SCAN SPEED
】
● 【
SET LEFT LIMIT
】
● 【
SET RIGHT LIMIT
】
● 【
RUN SCAN
】
● 【
CLEAR SCAN
】
● 【
EDIT SCAN TITLE
】
2. Define current scan number: operate joystick ,move the cursor to
【
scan number
】
, press
【
open
】
,tilt up/downjoystick to choose scan
number, press
【
open
】
to save. The following operations aim at the
current scan number.
3.
【 】
【 】 【 】
【 】
【 】 【 】
【
TITLE
】 【 】
【
TITLE
】
【 】
【 】 【 】
Scan is that pre-set two points , then the camera repeatedly scan
between the two points at a stable speed, the same magnification and
pan. Each dome has four scan.
The system enters into the main menu by calling 95 preset or by
calling 9 preset twice within 3 seconds. Click menu to enter "scan"
menu, as the left picture shows.
Scan speed setting: operate joystick to SCAN SPEED , press
OPEN , tilt up/down joystick to adjust scan speed, press OPEN
to save.
4. Left limit setting: operate joystick to
SET LEFT LIMIT , press
OPEN , operate joystick to choose objective image, press OPEN
to save. Right limit setting is the same as left limit setting..
5. Edit scan label: operate joystick, move the cursor to
EDIT SCAN
, press OPEN to enter submenu "edit title", move the
cursor to , the system will auto-set the label as SCAN 1,
press OPEN to revise.
6. Run scan: operate joystick to RUN SCAN , press OPEN
to exit the menu, and it starts to run scan.
SCAN
SCAN NUMBER 1
SCAN SPEED 20
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR SCAN
RUN SCAN
EDIT SCAN TITLE
BACK
EXIT
EDIT SCAN TITLE
：
SCAN 1
BACK
EXIT
TITLE
The label can set up to 16 characters, and doesn't need
editing characters. Pressing
OPEN continuously to jump
over and using spacebar to replace the deleted characters.
When you finish to edit a character, pressing
OPEN to
enter into the next editing character when you finish to edit
the last character, pressing
OPEN to save. Press CLOSE
to exit.
Character of label is suitable for choosing as follow: 0-9,
A-Z, :<>-. , Space. The editing ways of other labels are the
same as above.
【 】
【 】
【 】 【 】
NOTICE
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
DISPLAY SETUP
EXIT
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
1. left limit and right limit of scan can't be set the same point.
2.Under scan process, speed, magnification and tilt direction
won't change, if the speed, magnification and tilt direction of
the two limits are inconsistent, run scan is base on left limit.
NOTICE
27
Function setting
7. 3 Pattern
2
【
】 【 】
3
【
】 【 】
4
【 】
【 】
5
【
RECORD
】 【 】
【 】
6
【 】
【 】
Pattern is built-in function in camera; the speed dome can record
tracks that are no less than 180s. (A series of pan/tilt controlling and
lens controlling command). Each dome may set up to 4 patterns.
1. The system enters into the main menu by calling 95 preset or by
calling 9 preset twice within 3 seconds.
. Operate the joystick up and down and move the cursor to FUN-
CTION SETTING , press OPEN to enter submenu.
. Operate the joystick up and down and move the cursor to PAT-
TERN , press OPEN to enter menu "Pattern".
. Choose pattern number: move the cursor to PATTERN NUMBER ,
press OPEN , the pattern you choose as current one, the following
operations aim at the current pattern.
. Define current pattern tour: move the cursor to PAT-
TERN , press OPEN to set pattern track, move the image
random, and draw the focus. Each dome has a tour that is no less than
180s, a series of park time, magnification, focus will be recorded,
press OPEN to save.
. Run pattern: operate joystick to RUN PATTERN , press
OPEN to run, the dome will continuously and repeatedly record
the specific track.
PATTERNS
PATTERN NUMBER 1
RECORD PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN TITLE
BACK
EXIT
EDIT PATTERN
TITLE
：
PATTERN-1
BACK
EXIT
TITLE
NOTICE
When carry out program, run, clear pattern and edit title,
should choose pattern number at first.
● 【
PATTERN NUMBER
】
● 【
PATTERN
】
● 【
RUN PATTERN
】
● 【
CLEAR PATTERN
】
● 【
EDIT PATTERN TITLE
】
RECORD
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
DISPLAY SETUP
EXIT
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
28
Function setting