13
Customer Helpline
01904 727503
www.gardenservicecentre.co.uk
Exchange the spool
Maintenance and storage
WARNING!
Before cleaning, inspecting or repairing your unit, make sure the switch is off. Disconnect the plug
from mains.
Press the release latch on the spool head cover and remove cover, pulling it straight off the cutting
head assembly.
Pull the cutting head cover away from the spool holder.
Keep all areas of the cutting head cover and spool holder clean.
Replace the spool head cover, pressing firmly down towards the spool holder to ensure the cover
is fully located.
Check that the cap is correctly fitted by trying to remove it without depressing the two latches.
Place new spool into cutting head with cut out areas of the spool in line with eyelets.
Release line from cleat and feed line through eyelet.
Refit the spool head cover.
