5
Customer Helpline
01904 727503
www.gardenservicecentre.co.uk
Safety Information
Important - Please read these instructions fully before starting assembly
1. Wear protective glasses or goggles;
2. Never allow children or people unfamiliar with the instructions to use the machine;
3. Stop using the machine while people, especially children, or pets are nearby;
4. Only use the machine in daylight or good artificial light;
5. Before using the machine and after any impact, check for signs of wear or damage and repair
as necessary;
6. Never operate the machine with damaged guards or without the guards in place;
7. Keep hands and feet away from the cutting means at all times and especially;
8. Take care against injury form any device fitted for trimming the filament line length. After
extending new cutter line always return the machine to its normal operating position before
switching on;
9. Never fit metal cutting elements;
10. Never use replacement parts or accessories not provided or recommended by the
manufacturer;
11. Always ensure that ventilation openings are kept clear of debris;
WARNING!
Read these safety instructions thoroughly before connecting this product to the mains supply.
1. Before switching on, make sure that the voltage of your electricity supply is the same as
that indicated on the rating plate. This product is designed to operate on 230-240VAC 50Hz.
Connecting it to any other power source may cause damage.
2.
This product may be fitted with a non-rewireable plug. If it is necessary to change the fuse in
the plug, the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the plug
must not be used until a suitable replacement is obtained.
If the plug has to be changed because it is not suitable for your socket, or due to damage, it
should be cut off and a replacement fitted, following the wiring instructions shown below.
The old plug must be disposed of safely, as insertion into a 13 amp socket could cause an
electrical hazard.
WARNING!
A 13amp fuse must be fitted. The use of a high sensitivity residual current device (RCD) is
recommended to provide personal protection against harmful electric current.
Additional safety warnings for your grass trimmer
Electrical safety
