Challenge N1F-GT-220/250-C Скачать руководство пользователя страница 16

  

16

  

Customer Helpline 

 01904 727503

www.gardenservicecentre.co.uk

Technical data

Technical Data Table

Model No.

N1F-GT-220/250-C

Rated voltage

230-240V AC 50Hz

Input power

250W

No load speed

12000min

-1

Cutting Width

220mm

Cutting line Diameter

1.2mm

Protection class

II

Machine Weight

2.1kg

NOISE AND VIBRATION DATA

Sound pressure level(LpA)

80.5dB(A), KPA: 1,5dB(A)

Power sound level(LwA)

95dB(A)

Vibrations

2.32m/s

2

 , K: 1.5m/s

2

  

Noise and vibration data

A weighted sound pressure 78dB(A) KPA: 3dB(A)

A weighted sound power 90.3dB(A) KWA: 3dB(A)

The guaranteed sound power level: 95dB(A) 

Wear ear protection 

Typical weighted vibration 1.9m/s

2

 K=1.5m/s

2

WARNING!

The sound values have been determined according to noise test code given in EN50636-2-91, 

using the basic standards EN ISO 11201 and EN ISO 3744.

The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are 

necessary.

The declared vibration value (according to EN 786) has been measured in accordance with a 

standard test method and may be used for comparing one product with another. The declared 

vibration value may also be used in a preliminary assessment of exposure.

WARNING!

Depending on the actual use of the product the vibration values can differ from the declared total! 

Adopt proper measures to protect yourself against vibration exposures! Take the whole work 

process including times the product is running under no load or switched off into consideration! 

Proper measures include among others regular maintenance and care of the product and cutting 

attachments, keeping hands warm, periodical breaks and proper planning of work processes!

Содержание N1F-GT-220/250-C




















Отзывы: