Challenge CMT 330, Инструкция по установке и эксплуатации

Страница: 53 / 68

APR 2018
CMT-330 Three Knife Trimmer 4-1 4. Routine Tasks
Contents
TITLE PAGE
4.1 Book Underside Air Lift ............................. 4-2
4.2 Waste Bins ................................................ 4-2
4.3 Cut Stick / Cut Plates ................................ 4-3
4.3.1 Changing the Cut Stick ....................... 4-3
4.3.2 Changing the Cut Plates ..................... 4-3
4.4 Knives ....................................................... 4-4
4.4.1 Knife Change ...................................... 4-4
4.4.2 Knife Adjustment ................................. 4-7
4.4.3 Knife Spacers ...................................... 4-8
4.5 Check Pressure Switch ............................ 4-9
4.6 Safety Systems Check ............................. 4-9
4.6.1 Safety Check-off Sheet ..................... 4-10
Introduction
Certain tasks will be performed on a regular ba-
sis but not necessarily on a set schedule. The
safety systems check, however, should be done
before each shift. The waste bins must be emp-
tied when full. The knives should be replaced
when cut quality becomes unacceptable. Per-
forming as many of these tasks before a shift
begins prevents down time while a job is in pro-
gress and ensures safe operation of the ma-
chine.
4.
Routine Tasks